Panasonic UF-8300 Service Manual page 211

(4) Cut off the Protective Tab covering the G3 Line Jack
on the Rear Cover.
(5) Attach the G3 Line Label onto the Rear Cover as
illustrated.
(6) Loosen 6 Screws.
(7) Remove the SC Cover.
(8) Install the G3 Assembly as illustrated.
(9) Secure the G3 Assembly with 3 Screws (M3 x 6).
Note:
Secure 2 Screws on Right Rear Side first, and
remaining 1 Screw.
211
UF-8300/8200
UF-7300/7200