Panasonic UF-8300 Service Manual page 46

2.3.3. Control Panel Unit
(25) Remove 1 Screw.
(26) Remove the ADF Motor Assembly.
<PNL1 PC Board and PNL2 PC Board>
(1) Remove the Control Panel Unit.
(Refer to 2.3.1. [3.Control Panel Unit])
(2) Disconnect all the Harnesses on PNL1 PC Board.
(3) Remove 4 Screws.
(4) Remove the PNL1 PC Board (1804) from the Spacer.
Note:
Remove the PNL1 PC Board by nipping the spacer
with a pliers as illustrated.
(5) Remove 20 Screws.
(6) Remove the PNL2 PC Board (1806).
<LED Module and LCD Module>
(7) Remove 2 Screws.
(8) Remove the LED Module.
(9) Remove the PNL3 Board (1805) from the Lamp
Cover.
UF-8300/8200 Only
(10) Remove the LCD Module (111).
46
UF-8300/8200
UF-7300/7200