Panasonic UF-8300 Service Manual page 49

2.3.6. LSU Unit
[2. Drive Unit]
(1) Remove the Rear Cover (604).
(Refer to 2.3.1. [1.Rear Cover])
(2) Remove the SC Cover (714).
(Refer to 2.3.1. [6.ADF Drive Assembly])
(3) Remove the MJR Bracket Assembly.
(Refer to 2.3.1. [6.ADF Drive Assembly])
(4) Remove the SC Bracket Assembly. (Refer to 2.3.4.)
(5) Release the Harnesses from 6 Latches.
(6) Remove 2 Screws.
(7) Remove the Fan Assembly.
(8) Remove the Snap Ring.
(9) Remove the Pick Up Roller Clutch (921).
(10) Release 3 Harnesses from 4 Clamps.
(11) Disconnect 3 Harnesses on the SPC PC Board
(CN731, CN732, CN741).
(12) Disconnect the Harness on the Motor Assembly.
(13) Remove 3 Screws.
(14) Remove the Drive Unit.
Caution:
1. When removing the Drive Unit, exercise care not to
drop / lose the Gears.
2. When reinstalling, please make sure the Gears are
positioned properly as illustrated.
(1) Remove the Top Cover (601).
(Refer to 2.3.1. [4.Top Cover])
(2) Disconnect 2 Harnesses.
(3) Remove 3 Screws.
(4) Remove the LSU Unit (803).
49
UF-8300/8200
UF-7300/7200