Caution:
When removing the fixing Screw, fix the LEAD Plate
with a pliers as illustrated, not break the Fuser Lamp
Terminal.
(19) Remove 2 Screws.
(20) Remove the Halogen Lamp (1319).
Note:
Do not Touch the glass portion of the Fuser Lamp with
bare hands. Grease from finger prints will shorten its
life cycle, use isopropyl alcohol to clean finger prints.
(21) Shift the Fuser Roller and remove the Left Heat
Roller Bushing (1323).
(22) Remove the Heat Roller (1322).
(23) Remove the Heat Roller Gear (1320) and the Right
Heat Roller Bushing (1321).
(24) Remove 3 Screws.
(25) Remove 2 Thermostats (1303).
52
UF-8300/8200
UF-7300/7200