Specifying A Time As The Recording Duration; Direct Tv Recording; Timer Recording With The Television Set; Recording From An External Unit - Panasonic DMR-EX75 Operating Instructions Manual

Recording
DVD/HDD: This function is not possible with
Flexible Rec. If the channel or recording mode
(XP, SP, LP, EP) is changed while recording is
paused, the time is deleted.
AV3 S VIDEO IN VIDEO IN L/MONO - AUDIO IN - R
S VIDEO cable
Audio cable
L - White
R - Red
AV3 S VIDEO IN VIDEO IN L/MONO - AUDIO IN - R
Audio/Video cable
Yellow - Video
L - White
R - Red

Specifying a time as the recording duration

This function is not available for Timer Recordings.
Press REC on the unit during recording.
The recording time changes each time the button is pressed on the unit display:
OFF 0:30 1:00
Press STOP . The recording is paused and the time setting is deleted.
The unit switches itself off at the end of the recording if no functions are being
executed on another drive.
DIRECT TV REC

Direct TV recording

If your TV is equipped with Q Link, you can record a TV programme that you are
currently watching. Other settings are not necessary. The recorder automatically
switches to the appropriate station.
Press DIRECT TV REC for 3 seconds. Recording begins.
Press STOP to stop the recording.

Timer Recording with the television set

If your television set is equipped with the Q Link function and the possibility of
programming with Timer Recording, then you can do a Timer Recording with the
television set. To do so, connect the DVD Recorder with a fully wired 21-pin Scart
cable to the television set.
Program the Timer Recording on your television set.
Press DRIVE SELECT on the DVD Recorder to select the HDD or DVD drive.
Switch the DVD Recorder to the Standby mode.
The television set controls the beginning and end of the recording.
Press STOP to end the recording.
The recording will not start if the DVD Recorder is in Timer or EXT LINK standby.
If several Timer Recordings follow on in quick succession, they are recorded as
one title.
Recording from an external unit, e.g. a camera
Connect the external unit to the AV3 input terminal on the front side of the unit.
Select one of the two connection options.
The S VIDEO cable and audio cable (L/R) connection delivers the best quality.
You cannot receive signals from PCs with this unit.
If you activated the write protection, cancel it.
Select drive DVD or HDD with DRIVE SELECT.
Select the recording mode with REC MODE.
In STOP mode use INPUT SELECT to select input channel AV3.
Start playback on the external unit.
Press REC at the point where you want to start the recording.
Use STOP to stop the recording.
Connecting to AV3 (e.g. Camcorder)
If the audio output of the other device is mono, connect it to the L/MONO terminal.
Both the left and the right channels will be recorded.
Selecting the sound track to record for programmes with
dual channel sound
Analog channels
Before recording, select Sound setting Bilingual Audio Selection [M1] or [M2] in the
Setup menu. Select [M1] or [M2] on an external unit before recording.
If the output signal of the external unit is an NTSC signal, set the TV System to
[NTSC] in the [Setup] menu.
Digital channels
Press DISPLAY and select the setting [Multi Audio] under Audio.

Recording in dual channel sound

On DVD-RAM and HDD, both channels of a programme in dual channel sound are
recorded. Use AUDIO to switch between the two recorded sound tracks.
1:30 2:00 3:00
DVD HDD
4:00 OFF
18
RAM
HDD RAM
Not
31