Sound; Display - Panasonic DMR-EX75 Operating Instructions Manual

FUNCTIONS
FUNCTIONS
Dynamic Range Compression
Setup
Bilingual Audio Selection
Digital Audio Output
Tuning
Audio Mode for XP Recording
Disc
Picture
Audio Mode for DV Input

Sound

Display

Connection
SELECT
Others
ENTER
Setup
Digital Audio Output
PCM Down Conversion
Dolby Digital
Tuning
Disc
DTS
Picture
MPEG
Sound
Display
Dolby Digital
Connection
Others Bitstream
PCM
SELECT
ENTER
RETURN
Setup
Language
On-Screen Messages
Grey Background
Tuning
Disc
FL Display
Picture
Sound
Display
SELECT
Connection TAB
Others
RETURN
64
Setup
SETUP
To Others
Sound
Off
M1
Dynamic Range Compression
Dolby Digital
On: The level of quieter passages increases and the level of louder passages
Stereo 1
decreases. The audio can be clearly understood even when the volume is lowered.
Bilingual Audio Selection
TAB
If you want to record programmes that are broadcast in dual channel sound, you can
RETURN
select between the original language [M1] or another available language [M2]. If you
are copying from an external source or from a tape position, select the sound track on
the other unit.
Off
Digital Audio Output
Bitstream
Bitstream
Select the appropriate setting if you have connected an external unit to the
PCM
DIGITAL AUDIO OUT of the DVD Recorder.
PCM Down Conversion
Select the audio output mode for a scan frequency of 96 kHz or 88.2 kHz. Despite this
setting, signals are converted to 48 kHz or 44.1 kHz if they have a scan frequency over
96 kHz or 88.2 kHz or if the disc is copy-protected.
On: The connected unit cannot process signals with a scan frequency of 96 kHz or
88.2 kHz. Signals are converted with 48 kHz or 44.1 kHz.
Off: The connected unit can process signals with a scan frequency of 96 kHz or 88.2
kHz. Signals are output as 96 kHz or 88.2 kHz.
Dolby Digital, DTS, MPEG
Bitstream: The connected unit can decode the corresponding signal.
PCM: If the connected unit cannot decode the corresponding signal, the setting must be
changed to [PCM]. Otherwise, the loud noise can lead to damage to your hearing or
loudspeaker. Make the necessary changes depending on your audio system.
Audio Mode for XP Recording
Choosing the audio type when recording in XP mode. The picture quality of LPCM
recordings may possibly be poorer than normal recordings in XP mode.
Audio Mode for DV Input
Select the audio type when dubbing from the DV input.
Stereo 1: Original sound; Stereo 2: Voice-over, Mix: Original sound + voice-over.
English Display
10 sec.
Language
On
Bright
Select the language.
On-Screen Messages
Select the display time for screen flashes.
Off: The screen flashes are not shown on changing the station.
Grey Background
On: T he grey background is displayed when there is no analogue TV reception
FL Display
Dim: Changes the brightness of the display on the unit.
Automatic: With this setting, you can reduce the power consumption in standby
mode. The display is dark during replay. Press any key for the display to light up
again. The display goes off when the unit is switched off.
Setting
ENTER
[On] [Off] (Only Dolby Digital)
DVD-V
-R -RW(V) +R +R DL
-R DL +RW
[PCM Down Conversion]
[Dolby Digital] [DTS] [MPEG]
[On] [Off]
[Bitstream] [PCM]
[Dolby Digital] [LPCM]
[Stereo 1] [Stereo 2] [Mix]
+R +R DL
-R -R DL -RW(V) +RW
Setting
ENTER
[English]
[Off] [3 sec.] [5 sec.] [7 sec.] [10 sec.]
[On] [Off]
[Bright] [Dim] [Automatic]
Option
[M 1] [M 2]
Option
.
ENTER
ENTER