External Units; Connecting An Digital Amplifier; Connecting An Analogue Amplifier; Q Link Functions - Panasonic DMR-EX75 Operating Instructions Manual

External units

Amplifier (example)
OPTICAL
Optical digital audio cable
Push the jack all the
way into the terminal
with this side facing up.
Amplifier
L R
(example)
AUDIO IN
Audio cable
L - White
R - Red
The following systems from other
manufacturers have similar function to
Q Link from Panasonic.
- Easy Link (Trademark of Philips)
- SMARTLINK (Trademark of Sony)
- DATA LOGIC (Trademark of Metz)
- Megalogic (Trademark of Grundig)
For details, refer to your television's
operating instructions or consult your
dealer.
18
For all described connections:
Before you connect the cable, make sure that the power to both units is turned off.
After you have connected the cables, switch both units on.
Connecting a digital amplifier or a digital system component
If an amplifier equipped with a Dolby Digital, DTS or MPEG decoder is connected,
multi channel surround sound from a DVD-Video disc can be played back.
Connect an amplifier with a Dolby Digital, DTS or MPEG decoder.
Use an Optical digital audio cable.
In the Setup menu Sound, change the [Digital Audio Output] setting
according to your connected digital amplifier.
You cannot use a DTS Digital Surround Decoder that is not designed for DVD.
If the unit is connected to the television set with an HDMI cable and you are
using the DIGITAL AUDIO OUT (Optical) for audio output, change the setting
[Digital Audio Output] to [Optical Only] in the [Setup] menu.
Connecting an analogue amplifier or an analogue system component
In order to enjoy stereo or Dolby Pro Logic, connect the appropriate amplifier or an
analogue audio component.
Connect the AUDIO OUT (L/R) output e.g. to a Dolby Pro Logic amplifier.
As described, connect the Audio cable according to the colours and markings of
the connection terminal (white/L, red/R).
Connect this unit to a device with
a DTS decoder in order to be
able to play DVDs with this
symbol.
Q Link functions (with Scart cable at the AV1 terminal)
Download from TV
Station transfer from television set. During [data transfer from TV], data for the
station list are automatically downloaded from the TV set. The stations are stored in
the same presets of the DVD Recorder as on your TV set.
Direct TV recording
Press DIRECT TV REC to directly record the programme you are currently watching.
You do not need to enter anything else.
TV/DVD automatic switch on
If the TV set and DVD Recorder are switched off (in standby), both units are switched
on automatically by pressing PLAY, DIRECT NAVIGATOR, GUIDE, ShowView or
PROG/CHECK.
If your TV set is switched off (in standby), it is automatically switched on when you
press FUNCTIONS or PLAY or insert a disc (apart from DVD-RAM, DVD-R, DVD-
RW (DVD-Video format) and +R).
DVD automatic OFF. When you switch your TV set off, this automatically also
switches the DVD Recorder off. The automatic OFF only works in STOP mode.
This unit allows for Timer Recordings using the programming function of the
television (e.g. IDTV).
64
66
This unit can record and playback
stereo sound in Dolby Digital
(dual channel). DVD-Vs can be
played back in multi channel
sound.
10