Panasonic DMR-EX75 Operating Instructions Manual page 76

If you need help
HDMI
Which accessories are required
to hear multi channel Surround
Sound?
Switching on takes longer in
spite of the Quick Start function.
No picture on the television set.
Wrong screen format.
Part of the picture appears
duplicated some of the time
when using the output
COMPONENT VIDEO OUT.
No sound.
Low volume.
Sound with interference.
The required audio type
cannot be heard.
HDAVI Control is not working.
76
Multi channel sound can only be played back with this unit if it is connected with
an HDMI cable or a digital audio optical fibre cable to an amplifier with an
integrated decoder.
All units connected by HDMI are checked while switching on.
This can take a while.
Check whether the television set and DVD Recorder are connected correctly with
the HDMI cable. If the external unit has been connected correctly, the HDMI
message appears briefly on the display of the DVD Recorder.
If more than four units are connected with HDMI cables, you may possibly not
be able to see a picture. Reduce the number of connected units.
If the unit is connected via COMPONENT VIDEO OUT to a television unit which
is not progressive compatible, no unit can be connected with HDMI.
The [Progressive] setting is automatically switched to [On] in the Setup if a unit
is connected up with HDMI.
If a television set is connected via HDMI AV OUT, in the [Setup] menu, set the
setting [Aspect for 4:3 Video] to [4:3].
Check the setting [TV Aspect] in the [Setup] menu.
Do not connect this unit to the television set with an HDMI cable.
In the Setup menu, set the [Progressive] setting to [Off].
The amplifier connected via HDMI does not support CPPM and the HDMI Ver. 1.1.
Standard. No Multi Audio Disc can be played back.
The sound is not played back if the Bitstream Signal is output from HDMI AV OUT
or OPTICAL DIGITAL AUDIO OUT.
If more than four units are connected with HDMI cables, you may possibly not
hear any sound. Reduce the number of connected units.
If the unit is connected with an HDMI cable to a television set and OPTICAL
DIGITAL AUDIO OUT is used as audio output, in the [Setup] menu, set the
setting [Digital Audio Output] to [Optical Only].
When one or several units are connected via HDMI AV OUT, it is possible for
there to be interference with the sound. Select another connection type.
In the [Setup] menu, change the setting [Control with HDMI / Q Link] to
[HDMI and Q Link].
Use a fully wired HDMI cable.
The connected unit possibly does not support HDAVI control.
Page
17
65
66
65
65
66
66
17