Specifying A Paper Type For Bypass Tray - Konica Minolta Bizhub 601 User Manual

Copy paper/originals
To cancel changes to the settings, touch [Cancel].
8
Touch [OK], and then touch [OK] in the next two screens that appear.
The Basic screen appears again.
Note
The selected size button is programmed with the entered paper size, so that the paper size is available
to be selected again without being typed in. In addition, the size can be changed.
7.2.6

Specifying a paper type for bypass tray

If paper other than plain paper, such as OHP transparencies or special paper, is loaded in bypass tray, be
sure to change the paper type setting.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
bizhub 751/601 (Version 2)
7
7-19