Recording With Best Picture Quality (Vhs) - JVC DR-MX10SEK Instructions Manual

Recording with Best
Picture Quality (VHS)
ABCDEFGHILM
9
If the B.E.S.T. (Biconditional Equalised Signal
Tracking) function is used, the quality level of
the tape for recording is assessed
automatically to enable recording with the
best picture quality.
NOTES:
.. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .
0
Press VHS to light up the VHS lamp.
0
Setup Menu AB.E.S.T.B = AONB [
VHS
REC
NOTES:
.. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .
0
While the tape's quality level is being assessed, the
PAUSE button does not function.
Assessment of the tape will be carried out in the
following instances.
0
When recording for the first time after loading the
tape.
0
When the recording mode is changed.
Load a tape for recording, then perform the
usual steps for recording.
When recording starts, the indicator as illustrated below
appears on the TV screen. When this screen is
displayed, the quality level for the best recording
condition on the tape is assessed.
0
If this screen is not displayed, set the following. Setup
Menu ASUPERIMPOSEB = AAUTOB [
To set before recording begins
P115] l
A
0
B
0
PLAY
PAUSE
Press PAUSE and REC simultaneously.
This unit will pause recording and assess the tape's
quality level.
When the programme that you wish to record
starts, press PLAY.
Recording begins.
P113] a
EN I 99