JVC DR-MX10SEK Instructions Manual page 31

Vhs & hdd & dvd video recorder
Hide thumbs Also See for DR-MX10SEK:
Table of Contents

Advertisement

If not using an external receiver
E
Exit setup.
Proceed to step F.
If using an external receiver
E
Set up the external receiver.
A
Select AExternal Receiver 1B.
SELECT
CONFIRM
B
Check the message screen.
CONFIRM
C
Select and confirm on the type of
reception.
0
Select ACableB, ASatelliteB or ATerrestrialB.
SELECT
CONFIRM
D
Select and confirm on the provider.
E
Select and confirm on the brand.
F
Select and confirm on the socket.
0
Specify the terminal connected to the external
receiver.
G
After the message is displayed, check
and confirm on the connection.
0
The control signals are transmitted to the
external receiver in the test.
H
Confirm the completion message.
CONFIRM
0
Returns to the ASetupB screen.
External Receiver 1
None
Terrestrial
Set up a second or third external receiver if necessary.
F
Exit setup.
Proceed to step G.
Download programme data before using
the GUIDE Plus+ system.
F
G
/
Turn off this unit.
0
It takes about 24 hours to download sufficient data.
0
If the unit is turned on while downloading, the
download will be cancelled.
0
The programme listing data download is given
priority from 03:00 to 04:30, and VPS/PDC recording
cannot be performed properly. Set AVPS/PDCB to
AOFFB if performing timer recording at this time.
0
AEPGB is displayed on the front display panel during
downloading.
0
If you are using an external receiver, leave it on and
tune to your Host Channel. AHost Channel ListB
[
P33]
If your external receiver is not in the list
(Alternate Setup)
Operate from step E.
A
Select and confirm on ANoneB for the brand
setting.
B
Exit setup.
C
Tune the external receiver's channel to the host
channel.
0
Refer to AHost Channel ListB [
D
Leave the external receiver on.
E
Turn off this unit, and wait for one night.
The GUIDE Plus+ system will be automatically
updated. As new receivers will be added, search for
your receiver and complete the settings.
In order to use the programme listing, you need to
download the programme data using the new settings.
Turn off this unit, and wait for one more night.
P33].
EN I
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dr-mx10sefDr-mx10se

Table of Contents