Dubbing From Vhs To Hdd Or Dvd (Entire) - JVC DR-MX10SEK Instructions Manual

Dubbing from VHS to HDD
or DVD (Entire)
ABCDEFGHILM
9
Programmes recorded on a VHS tape can be
dubbed in entirety to the HDD or DVD disc.
CANCEL
B D
-
STOP
NOTES:
.. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .
0
Select AL/RB, ALB, ARB, or ANORMB for the playback
sound.
0
Starts dubbing after automatically rewinding the tape
to the beginning.
0
The tape will be automatically rewound when
dubbing ends.
0
When the HDD or DVD disc runs out of disc
remaining time, the tape will automatically stop at
that position and dubbing will cease.
0
If there are multiple VISS signals within a tape,
separate titles will be created for each VISS signal.
(Auto title creation dubbing function)
When titles reach 99 on DVD or 500 on HDD, they
will not be created.
0
If there are blanks of more than 2 seconds on the VHS
tape, the HDD/DVD will enter into pause mode.
Dubbing will resume once recorded part is detected.
This prevents useless recordings.
A
Load the tape to play.
0
When dubbing to a DVD disc, load a recordable
disc.
B
N
Select "VHS
B
DVD" in step
HDD and DVD Deck", then select
"ENTIRE". [ P72]
SELECT
CONFIRM
C
Set and confirm the recording.
0
ADubbing from HDD or DVD to VHSB, step
[ P76].
D
Select "EXECUTE".
SELECT
CONFIRM
When dubbing ends, the broadcast
screen appears automatically after a
message is displayed.
To cancel a dubbing that is in progress
A
Press STOP/CLEAR ( o).
B
Select ACANCELB, then press ENTER.
N
HDD" or "VHS
of "Dubbing between
ENTIRE
EXECUTE
C
EN I 77