Table of Contents
Advertisement
Simple timer programming for the
following week
A
Press PROG when playing back a
recorded programme.
B
Select "YES".
SELECT
CONFIRM
0
If there is inactivity for approximately 5 seconds,
the programme navigation screen will be
displayed. To cancel, press PROG.
0
If there is inactivity for approximately 1 minute
during setting, the settings will be cancelled and
the screen will return to the broadcast screen.
C
Set timer at the programme
navigation screen.
0
For timer setting, perform step
0
After the timer recording has been set, the
broadcast screen is displayed.
Overwrite protection setting for weekly/
daily recording (HDD)
When you wish to keep programmes specified for
overwriting, set overwrite protection. Or, dub to DVD
disc.
A
Set to HDD.
B
Display the Library Database
Navigation screen.
C
Select and confirm on "NAME".
D
Select and confirm on the initial letter
of the programme name.
YES
E-G
on P54, 55.
E
Select and confirm on the
programme that you wish to protect.
SELECT
CONFIRM
0
Icon specifying weekly/daily overwrite (
) will be attached.
F
Select "PROTECT".
SELECT
CONFIRM
G
Press ENTER.
H
Exit.
Programme alert message
0
For HDD timer programming, if there is a timer
programme that cannot be recorded within the
duration set due to the remaining capacity of
HDD, a programme alert message will be
display when the unit is turned on.
0
If APROGRAMME LISTB is selected and
confirmed, the APROGRAMME LISTB screen
will be displayed. Verify, cancel or change the
timer programme where necessary. AChecking,
Changing or Cancelling a Timer ProgrammeB
[
P57]
0
The display duration of the programme alert can
be set. Setup Menu APROGRAMME ALERTB
[
P112] Z
,
,
PROTECT
EN I
95
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
