Manual Tracking/Tape Remaining Time (Vhs); To Adjust Tracking Manually; To Check The Remaining Time On A Vhs Tape - JVC DR-MX10SEK Instructions Manual

Manual Tracking/Tape
Remaining Time (VHS)
ABCDEFGHILM
9
The auto-tracking function is automatically
activated to adjust picture distortion or
flickering when tape playback begins. If
picture distortion or flickering cannot be
removed with auto-tracking, adjust tracking
manually.
NOTE:
.. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .
0
Press VHS to light up the VHS lamp.
VHS
CANCEL
DISPLAY
REC MODE/
REMAIN
NOTES:
.. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .
0
You can also adjust when the picture jumps, or when
horizontal lines or flickering appears during still
picture or slow motion playback.
0
For tapes where the recording condition is extremely
bad or tapes recorded on other video cassette
recorders, it may not be possible to adjust tracking
adequately.
0
Although picture distortion or flickering during still
picture or slow motion playback may not disappear
even after adjusting, it is not a malfunction.
0
Noise may appear if a tape recorded in other than
standard mode is played on other video cassette
recorders.
H EN
102

To Adjust Tracking Manually

During playback
A
Disable auto-tracking.
VIDEO (MONO)L
0
Auto-tracking turns on/off with each press.
0
Automatic adjustment functions when auto-
tracking is on, during which the picture may be
distorted.
B
Adjust while viewing the picture
played.
B
0
Press + or - to adjust manually.
To Check the Remaining Time on a
VHS Tape
During playback or recording
To reset the counter
0
The counter on the TV screen or the front display
panel becomes A0:00:00B.
0
The remaining time displayed is an estimation, which
is calculated using the current recording mode.
0
Depending on the tape, the remaining time may not
be displayed correctly.
PR
− AUDIO − R
REC
F-1
PR
OR
Press + and -
simultaneously.