JVC DR-MX10SEK Instructions Manual page 110

Vhs & hdd & dvd video recorder
Hide thumbs Also See for DR-MX10SEK:
Table of Contents

Advertisement

Setup Menu
DVD VIDEO SET UP > AUDIO OUTPUT
D DIGITAL AUDIO OUT
Set in accordance with the device connected to the digital audio output terminal (digital coaxial). In addition, change the setting
when playing back bilingual sound. [
DOLBY DIGITAL/PCM
STREAM/PCM
PCM ONLY
E ANALOG AUDIO OUT
Set in accordance with the device connected when playing back DVD Videos.
STEREO
DOLBY SURROUND
F D.RANGE CONTROL
For setting the compression rate of the dynamic range (ratio of the maximum volume and the minimum volume) while playing
back with Dolby Digital.
NORMAL
WIDE RANGE
TV MODE
G OUTPUT LEVEL
For setting the audio output level.
STANDARD
LOW
DVD VIDEO SET UP > DISC PLAY SET UP
H RESUME
For setting whether to memorise the position where the disc is stopped during playback. This setting is compatible with DVD
Video, finalised DVD-RW/-R disc, Video CD and Super Video CD. Resume works on other discs (JPEG files not applicable)
and the HDD, regardless of this setting. However, CD-DA format discs do not support ADISC RESUMEB.
OFF
ON
DISC RESUME
HDD/DVD SET UP > HDD SET UP
I LIVE MEMORY
For setting the recording time for temporary recording. [
OFF
30 MIN
1 HR
3 HR
J DV RECORD AUDIO
For setting the audio when recording bilingual broadcast in DV mode.
MAIN
SUB
MAIN N L * SUB N R
H EN
110
(continued)
P100]
When connecting to a Dolby Digital decoder or an amplifier with built-in
decoder.
When connecting to a DTS, Dolby Digital decoder or an amplifier with built-in
decoder.
When connecting to a device (MD recorder, etc.) that is compatible only with
linear PCM.
When connecting to an audio amplifier or TV.
When connecting to a Dolby Surround compatible amplifier.
Normal compression rate.
Disables compression. (The effect may not be different from ANORMALB
depending on the discs.)
High compression rate. (Setting for TV. Even soft sound can be clearly heard.)
Maintains the output level.
Lowers the output level.
Do not memorise.
Memorises only the disc loaded.
Memorises resume points of 30 discs.
Disables temporary recording.
Performs temporary recording for 30 minutes.
Performs temporary recording for 1 hour.
Performs temporary recording for 3 hours.
Records the main audio.
Records the sub audio.
Distributes the main/sub audio to the left and right.
P96]

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dr-mx10sefDr-mx10se

Table of Contents