Basic Recording; Checking The Recording Picture And Sound Quality - JVC DR-M70SEK Instructions Manual

Video VR
DVD-RW DVD-RW
DVD-RW DVD-RW
Follow steps below to record TV
programs.
1
Turn on the unit. Load a
recordable disc.
Make sure that the TV input is set
on the unit.
This operation may take a
while to be recognized.
2
Using [REC SPEED], select a
recording speed.
XP
Refer to "Recording speed" on page 26.
3
Make sure that the recording for-
mat is set to the desired mode.
Refer to "Formatting a disc" on
pages 28-29.
When a DVD-RW disc is loaded:
You can choose Video mode or
VR mode from the Setting menu.

Checking the recording picture and sound quality

Video VR
DVD-RW DVD-RW DVD-RW DVD-RW
You can confirm the recording picture
and sound quality with the recording
speed you have selected before
attempting to record to a DVD disc.
1
While in the stop or recording
mode, press [REC MONITOR].
The TV program will be on the
screen in the recording picture
quality and the sound will be out-
put in the recording sound quality
with the recording speed you
have selected.
Recording

Basic recording

"Video mode" has been selected
DVD-R DVD-R
as the default. Refer to "Choosing
the recording format of a blank
disc" on page 28.
When a DVD-R disc is loaded:
DVD-R discs will always be in Video mode.
4
Using [CH + / -] or the
Number buttons, select a
desired channel to record.
5
Press [REC I] to start record-
ing.
0:58
I mark will be displayed for 5 seconds.
I
Press [PAUSE F] to pause.
Press [REC I] to resume.
6
Press [STOP C] to stop
recording.
This operation may take a
while to be completed.
DVD-R DVD-R
Press [REC SPEED] repeatedly
to change the recording speed.
The recording speed will be
changed as you press the button
as shown below. Refer to
"Recording speed" on page 26.
XP
SEP
• You cannot change the record-
ing speed during recording.
2
Press [REC MONITOR] again to
exit.
CH 12
Note
• Recording starts immediately
• When the clock setting has not
• When you record a TV program
• You cannot change the recording
• You can change channels dur-
Rec Monitor
XP 0:58
SP LP
SLP EP
Note
• If you press [REC MONITOR]
REPEAT
.@/: ABC DEF
1 2 3
GHI JKL MNO ZOOM
4 5 6
PQRS TUV W X YZ CH
7 8 9
CLEAR AUDIO
0
PROG
VCR Plus+
TOP MENU MENU/LIST
ENTER
RETURN
SLOW PL AY SLOW
5
REC STOP PAUSE
REC REC
SPEED MONITOR
2
after you press [REC I] and
continues until the disc is full
or you stop recording.
been made, the space for a date
and time of title names in the
Original or Playlist will be blank.
broadcasted in both Stereo and
SAP-audio on a DVD-RW/R, you
have to select the TV channel
audio (Stereo or SAP) before-
hand. Only the selected channel
audio will be recorded. Refer to
"Selecting the TV stereo or SAP"
on page 22 for more details.
speed during the REC pause mode.
ing the REC pause mode.
CLEAR AUDIO
0
PROG
VCR Plus+
TOP MENU MENU/LIST
ENTER
RETURN
SLOW PL AY SLOW
REC STOP PAUSE
REC REC
SPEED MONITOR
1
while receiving the bilingual
broadcast, the sound to be
recorded is output.
EN
4
5
6
1
2
31