Troubleshooting/Appendix; Q&A - JVC DR-MX10SEK Instructions Manual

Q&A
Preparations
Which discs are unplayable?
Can I use cartridge-enclosed DVD-RAMs?
See AAbout DiscsB [
Can I replace the HDD on my own?
No. This unit's HDD contains software required for operations,
and will not function if replaced with a commercially available
HDD.
My television is not equipped with video inputs, is
there other methods of connection?
Use an RF converter sold separately. For details on connection,
refer to the instruction manual of the RF converter.
Setup
The HDD is functioning although the unit is not on.
The HDD functions in the following instances even if the unit
is off.
0
While receiving programme listing data.
0
While HDD is being optimised.
The fan is functioning although the unit is not on.
The fan spins in the following instances even if the unit is off.
0
While receiving programme listing data.
0
During VPS/PDC recording standby.
0
When Setup Menu AL-2 SELECTB = ADECODERB
[ P114] k.
Can I watch programmes via the external receiver even
though the unit is not on?
Yes, this unit outputs signals from the [L-2 IN/DECODER]
terminal to the [L-1 IN/OUT] terminal even if it is off. See
AInput/Output SettingB [
However, this function is not available during programme
listing data downloading. In such cases, it is recommended
that the external receiver be connected directly to the TV.
Images output from this unit are vertically squeezed.
Set Setup Menu AMONITOR TYPEB = A16:9AUTOB
P114] g
[
H EN
120
P12].
P29]
Recording
The time of the clock seems to deviate.
See AClock SettingB [ P34].
Can I record simultaneously on the HDD and DVD?
No. This unit is equipped with only one tuner. It is not possible
to record simultaneously on two or more decks.
If I record to full capacity on the disc, will the old
recordings be erased?
It will not be erased. Recording will stop.
Can I switch the channel while recording is paused?
Yes, on the DVD deck. However, it is not possible to switch to
DV input. Switching is not possible during DV input recording.
Cannot activate pause while HDD is recording.
Unable to pause recording on the HDD. If PAUSE is pressed
while HDD is recording., it will enter into Live Memory
Playback's pause mode. However, record pause is possible
during external input recording. (By pressing REC and PAUSE
on the remote control simultaneously.)
Cannot switch between the main and sub audio after
recording a bilingual programme onto the DVD-R disc.
DVD-RW/-R (Video mode) recording will be recorded in the
sound as set. Setup Menu AVIDEO MODE RECORDING
P111] N
AUDIOB [
When recording movies and other bilingual programmes, the
use of DVD-RAM or DVD-RW (VR mode) discs is
recommended.
While recording on the VHS, the channel cannot be
changed even if I switch to the DVD or HDD.
As the VHS and DVD/HDD share the same tuner on this unit,
the channel cannot be changed while recording is in progress
even if you switch the deck.
What happens to the chapter (mark) during recording?
HDD, DVD-RAM,
DVD-RW/-R (VR mode)
Inserted when switched
from monaural or
During
recording bilingual broadcast to
stereo broadcast.
During
Marks will be copied.
dubbing
0
Chapters (marks) will not be copied for play list dubbing.
Each scene becomes a chapter.
0
For dubbings to the DVD-RW/-R (Video mode) discs, up to
99 marks per title are copied.
DVD-RW/-R
(Video mode)
Automatically
inserted
approximately
every 5 minutes.
Marks will be
copied.