Recording Features; Disc Remaining Time; Elapsed Recording Time Indication; Instant Timer Recording (Itr) - JVC DR-M100S Instructions Manual

BASIC OPERATIONS ON DVD DECK
36
EN

Recording Features

●
Turn on the unit.
●
Turn on the TV and select an input mode such as EXT1.
DISPLAY
REMAIN
R
RAM/RW

Instant Timer Recording (ITR)

It is possible to set the recording time during recording. Upon
completing recording, the unit stops and shut off automatically.
1
Press R on the unit to start recording.
2
Press R again to engage the ITR mode.
●
A0:30B is displayed on the front display panel.
3
If you want to record for more than 30 minutes, press R to
extend the time. Each press extends recording time by
30 minutes.
Normal recording N 0:30 N 1:00 ... N Maximum disc
remaining time N (back to the beginning)
NOTES:
Perform ITR using the R button on the unit.
●
●
The maximum recording time changes depending on the disc
remaining time.
Watch Another Programme While Recording On The
Unit
While recording is going on, you can watch another programme on
the TV. It does not interfere with recording.
1
Turn on the TV.
2
Select the desired channel to watch on the TV using your TV's
remote control.
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
●
Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time N Disc remaining time N Clock N (back
to the beginning)
●
You can also check the disc remaining time by pressing REMAIN
while the unit is stopped or recording is in progress. The list of
disc remaining times for all recording modes appears on the TV
screen.