Encoding Page - JVC VN-X35U Instructions Manual

Setting Using Internet Explorer
Setting (continued)

Encoding Page

This page is for setting JPEG and MPEG4 encoding parameters.
This page can be used during access using AadminB or AoperatorB.
● Click [Advanced Settings] to display setting menu.
● Click [Encoding].
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
● When settings on this page are altered during playback using Built-in Viewer, reboot the viewer.
● There is a maximum limit to the bit rate for transmission by VN-X35U. If a bit rate that exceeds the
maximum limit is specified, this new setting will not be applied. For details on the maximum
transmission limit, refer to the section on ANetwork RequirementsB (A Page 24).
Click
46
C D E F
A
B
G