Connection / Installation; Mounting The Lens - JVC VN-X35U Instructions Manual

Connection / Installation

Mounting the Lens

Note:
● Make use of a megapixel lens.
1.
Check the mounting method of the lens to
be used before mounting
● The mount method used for VN-X35U is CS
mount.
● Make use of the values listed in the table
below for the dimensions of the lens mount
(a) indicated in the following diagram.
Lens Flange Focus (b) Dimension (a)
CS Mount 12.5 mm
Lens
● Objects longer than the dimension (a) must
not be used as doing so may damage the
camera interior or prevent the lens from
being properly mounted, hence resulting in
malfunctions.
2.
Turn the lens in the clockwise direction to
mount it to the camera firmly
16
5.5 mm and
below
(a)
F
(b)
3.
When using a DC iris lens, pay attention
to the pin position before connecting the
lens cable
MONITOR OUT PAL OFF NTSC
STATUS
IRIS
3
1
2 4
3
1
Pin No.
(Without Built-in EE Amplifier)
1
2
3
4
Memo:
● Use a 4 Pin Plug to connect when the plug of
lens cable is different.
(Product number of 4 Pin Plug : CV2859-001)
For inquiries on the 4 Pin Plug, refer to the
authorized dealer.
2.
RESET
3.
4
2
DC Iris Lens
Damping (-)
Damping (+)
Driving (+)
Driving (-)