JVC VN-X35U Instructions Manual page 32

Network Settings
IP Address Settings
(continued)
Changing the IP address using the
Internet Explorer (continued)
5
Click [Detalis] of the VN-X35U Built-in Veiwer
6
The [Basic Settings1] screen appears
C
Click
A confirmation screen appears. Press the[OK] button. VN-X35U restarts using the new IP address. It
takes about one minute for the camera to reboot.
Memo:
● Access from this computer may fail when the IP address of VN-X35U is changed. To enable access
to VN-X35U from the same computer, alter the IP address at the computer accordingly.
When the display or configuration of the opened screen appears strange, check
using the following procedures.
A
[Start] - [Control Panel]
Click
B
[Settings]
Click the
C
[DPI setting]
Check that
D
Otherwise, change the setting to
32
- [Display]
and open the
[Display Properties]
tab in the
[General]
in the tab has become
[Normal size(96DPI)]
Click
A
Set the[IP setting] item to [DHCP
Disable].
Enter the values you wish to
specify in the [IP address],
[Subnet Mask] and [Default
Gateway] fields.
B
Select the [Time Zone].
[Display Properties]
[Advanced]
windows and click the
[Normal size(96DPI)]
andreboot windows
window
button