JVC VN-X35U Instructions Manual page 71

Jvc megapixel ip camera instructions
Hide thumbs Also See for VN-X35U:
Table of Contents

Advertisement

Destination Address
A
Access
Restrictions
B
IP Address
Note:
● Note that when AallowB is selected and all IP address fields are left blank, JPEG/MPEG4 acquisition
by all IP addresses will be denied.
Restrictions are not imposed on access to the Web Settings page.
Additionally, VN-X35U will also deny access when instructions for transmission to the specified IP
address are sent via API.
Memo:
● To specify a specific IP address range, enter a combination of the IP address and subnet mask in
the [IP Address] field.
● Define the subnet mask using a length between 8 to 30 bits.
For example, a range between 192.168.0.0 to 192.168.0.255 is denoted as 192.168.0.0/24 ([IP
Address]/[bit length of subnet mask]).
Restrictions may be imposed on clients accessing VN-X35U using the IP
address.
When AdenyB is selected, acquisition of JPEG/MPEG4 via the IP address
specified for the [IP Address] item will be denied. Restrictions are not
imposed on access to the Web Settings page.
When AallowB is selected, acquisition of JPEG/MPEG4 via the IP address
specified for the [IP Address] item will be permitted. Restrictions are not
imposed on access to the Web Settings page.
When a multicast address is specified and AdenyB is selected, VN-X35U
will deny transmission to this multicast address.
When a multicast address is specified and AallowB is selected, VN-X35U
will only accept transmission to this multicast address and deny
transmission to multicast addresses that are not stated in the [IP Address]
field.
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vn-x35ul - network camera

Table of Contents