Privacy Mask Page - JVC VN-X35U Instructions Manual

Privacy Mask Page

Privacy Mask is a feature that enables masking of a portion of the image.
VN-X35U enables unlimited privacy masks to be specified in different shapes at your favorite locations.
The Privacy Mask masks area by uploading a BMP file painted in red (created separately). The
displayed color is determined by the color specified on this page.
This page can be used during access using AadminB or AoperatorB.
● First of all, configure the encoding settings.(A Page 39)
● Click [Advanced Settings] to display setting menu.
● Click [Privacy Mask].
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
Note:
● his feature can be used when the distribution size pattern setting on the Encoding page is set to
B (MPEG4 only), E (JPEG only), or G. (A Page 39)
Memo:
● [Privacy masks cannot be used when [MONITOR OUT] selection switch is set to NTSC or PAL.
Set the privacy mask to AOffB. After changing the [MONITOR OUT] switch setting, press the
[RESET] button for less than 2 seconds to reboot the camera.
Click
Mask Color Settings Screen
A
B
C
D
61