Additional Cautions; Cautions For Setting The Detection Function; Cautions For Changing The Encoding Setting; Troubleshooting - JVC VN-H157WPU Instructions Manual

Additional Cautions

Cautions for setting the detection function

You cannot set motion detection, audio detection, and tampering detection at the same time.
An error message is displayed when one detection function setting is already enabled and you try to select
another. Check the content of the error message, set the already-enabled detection function to "OFF", and
then reconfigure the detection function. (
Settings" ─ [Motion Detection] Page, [Audio Detection] Page, [Tampering Detection] Page)

Cautions for changing the encoding setting

When changing an already-configured encoding setting on the [Basic Settings2] page, [Encoding] page, or
[SD recording] page, PTZ and the auto patrol settings are cancelled.
In this case, set PTZ and the auto patrol settings again after setting the encoding setting. ( "Instructions
(Setting)" ─"Internet Explorer Setting" ─ "Advanced Settings" ─ [PTZ] Page, [Auto Patrol] Page)

Troubleshooting

Check the following items if you cannot record to an SD card.
Use an SD card that is compatible with this camera. (
Follow the instructions in [SD Card Record] Page (
Refer to "SD Card Recording Error Indicator" (
flashes orange.
You may become unable to update the screen if you frequently move between the SD card playback screen
and the advanced settings screen.
Press the [Cancel] button, or press the refresh button of Internet
Check the following items if the frame rate of images which are recorded to an SD card is lower than the set
value or variable.
When the Sense Up functions activate, (
"Advanced Settings" ─ [Camera] Page) the sensitivity is increased by decreasing the frame rate of
images recorded to the SD card. As a result, the number of playback frames may be lower and proper
playback may not be possible.
In some cases, the video output file may not be saved to the computer even when using [Export] (
With Windows 7 or Windows Vista, run Internet Explorer as Administrator.
To do so, perform the following:
1. Right click the Internet Explorer icon.
2. Select [Run as Administrator].
© 2013 JVC KENWOOD Corporation
"Instructions (Setting)" ─"Internet Explorer Setting" ─ "Advanced
Page 4)
Page 8) to enable SD card recording settings.
Page 19), when the camera [STATUS] indicator lamp
"Instructions (Setting)" ─ "Internet Explorer Setting" ─
.
Explorer
Page 17 ⑤).
LST1392-001B