Auto Patrol Page - JVC VN-X35U Instructions Manual

Auto Patrol Page

Perform Auto Patrol setting to switch image display between multiple positions according to the interval
that has been set.Set when viewing registered positions in order.
This page can be used during access using AadminB or AoperatorB.
● First of all, configure the encoding settings.(A Page 39)
● Click [Advanced Settings] to display setting menu.
● Click [Auto Patrol].
● Register position using PTZ feature.(A Page 95)
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
Note:
● This feature can be used when the distribution size pattern setting on the Encoding page is set to A
(MPEG4 only), C (MPEG4 only), D (JPEG only), F, or H. (A Page 39)
Whole shooting range
HOME （No ０）
Position 2
No ５
Position 4
No ４
No.0(HOME)
No. 5 (Position 2)
Position１
No 1
Position ３
No ２
Position ５
No ３
No. 1 (Position 1)
No. 4 (Position 4)
No. 2 (Position 3)
No. 3 (Position 5)
59