Time Page - JVC VN-X35U Instructions Manual

Setting Using Internet Explorer
Setting (continued)

Time Page

This page is for setting time.
This page can be used during access using AadminB.
● Click [Advanced Settings] to display setting menu.
● Click [Time].
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
Click
A
SNTP
B
NTP Server
C
Access Interval
D
Time
E
Time Zone
F
Pc time to
Camera
72
For setting the SNTP client feature.
When this is set to AOnB, the system accesses the specified NTP server at
regular intervals to acquire the time.
In addition, time will be recorded in the JPEG headers distributed by
VN-X35U. Discontinuity in JPEG header's time may occur immediately
before and after acquiring time from the NTP server.
For setting the IP address of the NTP server.
For setting the time interval for access to the NTP server.
Displays the time on the clock of VN-X35U.
The clock time can be changed by entering an appropriate value. (Second
value cannot be specified.)
In addition, time will be recorded in the JPEG headers distributed by
VN-X35U. Discontinuity may occur in the JPEG header's time immediately
before and after changing the time.
For setting the time zone.
Click [Set] to load the clock time of the computer in use on the camera.
A
B
C
D
E
F