Where To Go For More Troubleshooting Information; Cleaning The Cisco Unified Ip Phone - Cisco 7931G Administration Manual

Where to Go for More Troubleshooting Information

Table 9-4
Metric Change
Conceal Ratio and
Conceal Seconds
increase significantly
Conceal Ratio is near
or at zero, but the
voice quality is poor
Voice quality metrics do not account for noise or distortion, only frame loss.
Note
Where to Go for More Troubleshooting Information
If you have additional questions about troubleshooting the Cisco Unified IP Phones, several Cisco.com
web sites can provide you with more tips. Choose from the sites available for your access level.
•
•

Cleaning the Cisco Unified IP Phone

To clean your Cisco Unified IP Phone, use a soft, dry cloth to wipe the phone and the screen. Do not
apply liquids or powders directly on the phone. As with all non-weather-proof electronics, liquids and
powders can damage the components and cause failures.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
9-16
Changes to Voice Quality Metrics
Condition
Network impairment from packet loss or high jitter.
•
Noise or distortion in the audio channel such as echo or audio levels.
•
Tandem calls that undergo multiple encode/decode such as calls to a
•
mobile network or calling card network.
• Acoustic problems coming from a speakerphone, hands-free mobile phone
or wireless headset.
Check packet transmit (TxCnt) and packet receive (RxCnt) counters to verify
that voice packets are flowing.
Cisco Unified IP Phone Troubleshooting Resources:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_
support_series_home.html
Cisco Products and Services (Technical Support and Documentation):
http://www.cisco.com/en/US/products/sw/voicesw/tsd_products_support_
category_home.html
Chapter 9 Troubleshooting and Maintenance
OL-20798-01