Cisco 7931G Administration Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. IP Phone
  5. 7931G - Unified IP Phone VoIP
  6. Administration manual

Cisco 7931G Administration Manual

For cisco unified communications manager 7.1 (sccp and sip) chapter 3
Hide thumbs Also See for 7931G:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Administration Manual, User Manual
Setting Up the Cisco Unified IP Phone
This chapter includes the following topics, which help you install the Cisco Unified IP Phone 7931G on
an IP telephony network:
•
•
•
•
•
•
•
•
Before you install a Cisco Unified IP Phone, you must decide how to configure the phone in your
Note
network. Then you can install the phone and verify its functionality. For more information, see
Chapter 2, "Preparing to Install the Cisco Unified IP Phone on Your Network."

Before You Begin

Before installing the Cisco Unified IP Phone, review the requirements in these sections:
•
•

Network Requirements

For the Cisco Unified IP Phone 7931G to successfully operate as a Cisco Unified IP Phone endpoint in
your network, your network must meet these requirements:
•
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP and SIP)
OL-18988-01
Before You Begin, page 3-1
Network Requirements, page 3-1
Cisco Unified Communications Manager Configuration, page 3-2
Working Voice over IP (VoIP) network:
-
VoIP configured on your Cisco routers and gateways
Cisco Unified Communications Manager Release 4.x or higher installed in your network and
-
configured to handle call processing
3
C H A P T E R
3-1

Advertisement

Table of Contents
loading

Related Manuals for Cisco 7931G

Summary of Contents for Cisco 7931G

  • Page 1: Table Of Contents

    • Cisco Unified Communications Manager Configuration, page 3-2 Network Requirements For the Cisco Unified IP Phone 7931G to successfully operate as a Cisco Unified IP Phone endpoint in your network, your network must meet these requirements: • Working Voice over IP (VoIP) network: –...

  • Page 2: Understanding The Cisco Unified Ip Phone 7931G Components

    “Adding Users to Cisco Unified Communications Manager” section on page 5-18 for details. Understanding the Cisco Unified IP Phone 7931G Components The Cisco Unified IP Phone 7931G includes these components on the phone or as accessories for the phone: Network and Access Ports, page 3-2 •...
  • Page 3 The handset is designed especially for use with the Cisco Unified IP Phone 7931G. It includes a light strip that indicates incoming calls and voice messages waiting. To connect a handset to the Cisco Unified IP Phone, plug the cable into the handset and the Handset port on the back of the phone.

  • Page 4: Connecting A Headset

    Connecting a Headset To connect a headset to the Cisco Unified IP Phone, plug it into the Headset port on the back of the phone. Press the Headset button on the phone to place and answer calls using the headset.

  • Page 5: Installing The Cisco Unified Ip Phone

    Installing the Cisco Unified IP Phone Installing the Cisco Unified IP Phone You must connect the Cisco Unified IP Phone to the network and to a power source before using it. See Figure 3-1 for a graphical representation of the connections.

  • Page 6: Securing The Phone With A Cable Lock

    Securing the Phone with a Cable Lock You can secure the Cisco Unified IP Phone 7931G to a desktop using a laptop cable lock. The lock connects to the security slot on the back of the phone, and the cable can be secured to a desktop.

  • Page 7: Mounting The Phone To The Wall

    Mounting the Phone to the Wall You can mount the Cisco Unified IP Phone on the wall using special brackets that are available in a Cisco Unified IP Phone wall mount kit. (Wall mount kits must be ordered separately from the phones.) You can also attach the phone to the will without a wall mount kit.

  • Page 8: Verifying The Phone Startup Process

    Hang the phone on the wall. Step 3 Verifying the Phone Startup Process After the Cisco Unified IP Phone has power connected to it, the phone begins its startup process by cycling through these steps. These buttons flash on and off in sequence: –...

  • Page 9: Configuring Startup Network Settings

    Obtain the CAPF authentication code that was set when the CAPF was configured. Step 1 From the phone, press the Applications Menu button, then choose Settings > Security Configuration. Step 2 Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP and SIP) OL-18988-01...
  • Page 10 Settings > Model Information, and ensuring that the LSC setting shows Installed. Related Topic • Understanding Security Features for Cisco Unified IP Phones, page 1-11 Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP and SIP) 3-10 OL-18988-01...

Table of Contents