Configuring Cisco Unified Ip Phones In Cisco Unified Cm - Cisco 7931G Administration Manual

Overview of Configuring and Installing Cisco Unified IP Phones
After you have set up the IP telephony system and configured system-wide features in
Cisco Unified CM, you can add IP phones to the system.
The following topics provide an overview of procedures for adding Cisco Unified IP Phones to your
network:
•
•

Configuring Cisco Unified IP Phones in Cisco Unified CM

To add phones to the Cisco Unified CM database, you can use:
•
•
•
•
For more information about these choices, see
Manager, page
For general information about configuring phones in Cisco Unified CM, see the Cisco Unified
Communications Manager System Guide,
Communications Manager Administration Guide,
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
1-20
Configuring Cisco Unified IP Phones in Cisco Unified CM, page 1-20
Installing Cisco Unified IP Phones, page 1-23
Auto-registration
Cisco Unified CM Administration
Bulk Administration Tool (BAT)
BAT and the Tool for Auto-Registered Phones Support (TAPS)
2-7.
Chapter 1 An Overview of the Cisco Unified IP Phone
Adding Phones to Cisco Unified Communications
Cisco Unified IP Phones, and the Cisco Unified
Cisco Unified IP Phone Configuration.
OL-20798-01