Cisco 7931G Administration Manual page 36

Overview of Configuring and Installing Cisco Unified IP Phones
Table 1-7 Checklist for Configuring the Cisco Unified IP Phone 7931G in Cisco Unified CM (continued)
Task and Purpose
Add and configure directory numbers (lines) on the phone by
4.
completing these required fields in the Directory Number
Configuration window.
• Directory number(s)
• Partition
Multiple Calls and Call Waiting
•
Call Forwarding and Pickup (if used)
•
Voice Messaging (if used)
•
Adds primary and secondary directory numbers and features
associated with directory numbers to the phone.
Customize softkey templates.
5.
Adds, deletes, or changes order of softkey features that display on
the phone.
Configure speed-dial buttons and assign speed-dial numbers
6.
(optional).
Adds speed-dial buttons and numbers.
Users can change speed-dial settings on their phones by
Note
using Cisco Unified CM.
Configure Cisco Unified IP Phone services and assign services
7.
(optional).
Provides IP Phone services.
Users can add or change services on their phones by using
Note
Cisco Unified CM.
You must specify a service URL with an IPv4 address.
Assign services to phone buttons (optional).
8.
Provides single button access to an IP phone service or URL.
Add user information by configuring required fields:
9.
Name (last)
•
User ID
•
Password (for Cisco Unified CM web pages)
•
PIN (for use with Extension Mobility and Personal Directory)
•
Adds user information to the global directory for Cisco Unified CM.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
1-22
Chapter 1 An Overview of the Cisco Unified IP Phone
For More Information
See the Cisco Unified Communications Manager
Administration Guide, Directory Number
Configuration.
See Telephony Features Available for the Phone,
page 5-2.
See the Cisco Unified Communications Manager
Administration Guide, Softkey Template
Configuration.
See Configuring Softkey Templates, page
See the Cisco Unified Communications Manager
Administration Guide, IP Phone
See the Cisco Unified Communications Manager
Administration Guide, IP Phone
See the "Setting Up Services" section on
page 5-21.
See the Cisco Unified Communications Manager
Administration Guide, IP Phone
See the Cisco Unified Communications Manager
Administration Guide, End User
See Adding Users to Cisco
Unified Communications Manager, page
If your company uses a a Lightweight Directory
Access Protocol (LDAP) directory to store
information on users, you can install and configure
Cisco Unified Communications to use your existing
LDAP directory, see Configuring Corporate
Directories, page 5-17.
5-20.
Configuration.
Configuration.
Configuration.
Configuration.
5-21.
OL-20798-01