Honda Civic Owner's Manual page 94

06/08/05 21:55:49 32SMG610_094
Indicators in the trip computer show:
: Your vehicle's current fuel
mileage in kilometers per hour and
l/100 km.
: Your vehicle's current fuel
mileage in miles per hour and mpg.
On diesel models with DPF
The display may show a current fuel
mileage reading higher than in
normal driving while the particulate
matter (PM) is burnt and removed
from the diesel particulate filter
(DPF). For more information, see
page 497 .
: The estimated distance you
can travel on the fuel remaining in
the tank.
This distance is estimated from the
fuel economy you have achieved
over the last few kilometers (miles),
so it will vary with changes in speed,
traffic condition, etc.
: The time travelled since
you last turned the ignition switch to
the ON (II) position.
: The average speed you are
travelling is displayed in kilometers
per hour (km/h) or miles per hour
(mph) depending on the display
mode you selected.
: Your vehicle's average fuel
mileage since you last reset the trip
computer A.
: Your vehicle's average fuel
mileage since you last reset the trip
computer B.
The average fuel mileage is updated
once per 10 seconds. When you reset
a trip meter, the average fuel
mileage for that trip meter also
resets. To reset the values in the trip
computer, press and hold the SEL/
RESET button until the number
resets to ''0.0.''
Multi-Information Display
TRIP METER
OUTSIDE TEMPERATURE
INDICATOR
ODOMETER
The lower segment always shows
the odometer, trip meter and the
outside temperature in the normal
display mode.
CONTINUED
Instruments and Controls
91