06/08/05 22:07:16 32SMG610_184
Cigarette Lighter
CIGARETTE
LIGHTER
The ignition switch must be in the
ACCESSORY (I) or the ON (II)
position for the cigarette lighter to
work. To heat up the lighter, push it
in. It will pop out when it is ready for
use. Do not hold the lighter in while
it is heating up, you could cause it to
overheat.
Interior Convenience Items
If you push in the cigarette lighter
without the ignition switch in the
ACCESSORY (I) or the ON (II)
position, it will not pop out. To return
the cigarette lighter in place, you
must turn the ignition switch on. Do
not try to pull it out forcibly.
Instruments and Controls
181