Honda Civic Owner's Manual page 392

06/08/05 22:35:25 32SMG610_392
5. Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place, and clip the end into
the slot.
6. Push the electrical connector onto
the new bulb. Make sure it is
connected securely.
7. Reinstall the cover over the back
of the headlight assembly and turn
it clockwise to lock in place. Make
sure it is right side up; it is marked
''TOP.''
8. Turn on the headlights to test the
new bulb.
High Beam Headlights
(Diesel models)
1. Open the bonnet.
To change a bulb on the left side,
remove the nut on the battery stay,
then push the battery toward the
windscreen to obtain enough
working space.
Lights
WASHER FLUID RESERVOIR CAP
OVER
FLOW
TUBE
COOLANT TUBES
To change a bulb on the right side,
remove the upper part of the
washer fluid reservoir by pulling it
straight out.
CONTINUED
Maintenance
389