Honda Civic Owner's Manual page 261

06/08/05 22:17:50 32SMG610_261
Audio System (on vehicles with navigation system)
Selecting a different folder with the
TUNE bar also deactivates this
function.
SCAN The SCAN function
samples all tracks on the disc in the
order they are recorded on the disc
(all files in MP3 or WMA mode). To
activate the scan feature, press and
release the SCAN button. You will
see SCAN in the side display. You
will get a 10 second sampling of each
track/file on the disc. Press the
SCAN button again to get out of scan
mode and play the last track sampled.
Pressing either side of the SEEK/
SKIP bar also turns off the scan
feature.
258
Features
You can also select the scan feature
on the audio display. Press the
AUDIO button to view the audio
display, then push down the selector
on the interface dial. Push the
selector to the right to select the
scan feature. You will see SCAN
blinking on the display. To turn off
this feature, push the selector to the
right again.
To Stop Playing a Disc
Press the eject button ( ) to
remove the disc. If you eject the disc,
but do not remove it from the slot,
the system will automatically reload
the disc after 10 seconds and put it in
pause mode. To begin playing, press
the CD button.
You can also eject the disc when the
ignition switch is off.
To play the radio when a disc is
playing, press the AM/FM button.
Press the CD button again to switch
back to the disc player.
To play the tape when a disc is
playing, insert a tape in the player
(optional). If a tape is in the player,
press the AUX button. Press the CD
button again to switch back to the
disc player.