Honda Civic Owner's Manual page 286

06/08/05 22:21:08 32SMG610_286
1. With your phone on and the
ignition switch in the
ACCESSORY (I) or ON (II)
position, press and release the
Talk button. After the beep, say
''Phone set up.'' The HFT system
response is ''Phone set up options
are status, pair, edit, delete, and
list.''
2. Press and release the Talk button.
After the beep, say ''Pair.'' The
HFT system response is ''The
pairing process requires operation
of your mobile phone. For safety,
only perform this function while
the vehicle is stopped. State a four-
digit code for pairing. Note this
code. It will be requested by the
phone.''
Hands-Free Telephone (HFT) System (For some types)
3. Press and release the Talk button.
After the beep, say the four-digit
code you want to use. For example,
say ''1, 2, 3, 4.'' The HFT system
response is, ''1, 2, 3, 4. Is this
correct?''
4. Press and release the Talk button.
After the beep, say ''Yes.'' The
HFT system response is
''Searching for a Bluetooth phone.
Make sure the phone you are
trying to pair is in discovery mode.''
NOTE: Steps 5 and 6 show a
common way to get your phone into
its Discovery mode. If these steps do
not work on your phone, refer to the
phone's operating manual.
5. Follow the prompts on your phone
to get it into its Search mode. The
phone will search for the HFT
system. When it comes up, select
Hands-Free Telephone System
from the list of options displayed
on your phone.
6. When asked by the phone, enter
the four-digit code from step 3 into
your phone. The HFT system
response is ''A new phone has
been found. What would you like
to name this phone?''
7. Press and release the Talk button.
After the beep, say the name you
want to use. For example, say
''Eric's phone.'' The HFT system
response is ''Eric's phone has been
successfully paired. Returning to
the main menu.''
8. If you want to pair another phone,
repeat steps 1 through 7.
CONTINUED
Features
283