Honda Civic Owner's Manual page 476

06/08/05 22:46:27 32SMG610_476
Checking and Replacing Fuses
If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages
476 and 477 on petrol models, and
pages 478 and 479 on diesel models,
or the diagram on the fuse box lid,
which fuse or fuses control that
device. Check those fuses first, but
check all the fuses before deciding
that a blown fuse is the cause.
Replace any blown fuses, and check
if the device works.
FUSE BLOWN
1. Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
2. On the under-bonnet fuse box,
remove the cover from the fuse
box.
Fuses
FUSE
BLOWN
3. Check each of the large fuses in
the under-bonnet fuse box by
looking through the side window
at the wire inside. Remove the
screws with a Phillips-head
screwdriver.
CONTINUED
Taking Care of the Unexpected
473