06/08/05 22:41:45 32SMG610_440
To install a wheel cover, see page
440
.
BRAKE HUB
16.
Before mounting the spare tyre,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.
Changing a Flat Tyre
17.
Put on the spare tyre. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten the
wheel nuts fully.
18.
Lower the vehicle to the ground,
and remove the jack.
CONTINUED
Taking Care of the Unexpected
437