Honda Civic Owner's Manual page 126

06/08/07 17:57:22 32SMG610_126
Elapsed Time Reset
To cause the elapsed time to reset
every time you turn the ignition
switch to the LOCK (0) position or
reset the trip meter A or B, adjust it
as described as follows.
While the multi-information display
is showing ''ELAPSED TIME
RESET,'' press the SEL/RESET
button. The display changes to the
setting display.
You can select ''IGN OFF,''
''TRIP A,'' or ''TRIP B''. Each time
you press the INFO button, the
selected mode switches between
them. Enter your selection by
pressing the SEL/RESET button.
Multi-Information Display
IGN OFF: The elapsed time is reset
when you turn the ignition switch to
the LOCK (0) position.
TRIP A: The elapsed time is reset
when you reset the trip meter A.
TRIP B: The elapsed time is reset
when you reset the trip meter B.
CONTINUED
Instruments and Controls
123