Immobilizer System; Ignition Switch - Honda Civic Owner's Manual

06/08/05 22:02:59 32SMG610_150

Immobilizer System

The immobilizer system protects
your vehicle from theft. If an
improperly-coded key (or other
device) is used, the engine's fuel
system is disabled.
When you turn the ignition switch to
the ON (II) position, the immobilizer
system indicator should come on
briefly, then go off. If the indicator
starts to blink, it means the system
does not recognize the coding of the
key. Turn the ignition switch to the
LOCK (0) position, remove the key,
reinsert it, and turn the ignition
switch to the ON (II) position again.
The system may not recognize your
key's coding if another immobilizer
key or other metal object (i.e. key
fob) is near the ignition switch when
you insert the key.
Immobilizer System, Ignition Switch
If the system repeatedly does not
recognize the coding of your key,
contact your dealer.
Do not attempt to alter this system
or add other devices to it. Electrical
problems could result that may make
your vehicle undrivable.
If you have lost your key and cannot
start your engine, contact your
dealer.
(EU models)
EC Directives
This immobilizer system complies
with the R & TTE (Radio equipment
and Telecommunications Terminal
Equipment and the mutual
recognition of their conformity)
Directives.

Ignition Switch

The ignition switch has three
positions: LOCK (0), ACCESSORY
(I), and ON (II).
LOCK (0) You can insert or
remove the key only in this position.
To turn the key, push it in slightly.
CONTINUED
Instruments and Controls
147