Mitsubishi FR-E 500 Instruction Manual page 189

Operation Panel Indication
Name
Description
Check point
Corrective action
Operation Panel Indication
Description
Corrective action
PS
PU stop
A stop made by pressing the
set in Pr. 75 "PU stop selection".
Check for a stop made by pressing the
operation panel during external operation.
Refer to page 106.
Err.
This alarm appears if:
• The RES signal is on;
• You attempted to set any parameter value in the external
operation mode;
• You attempted to change the operation mode during
operation;
• You attempted to set any parameter value outside its
setting range.
• You attempted to set any parameter value during operation
(while signal STF or STR is ON).
• You attempted to set any parameter value while parameter
write is being inhibited in Pr. 77 "parameter write inhibit
selection".
Perform operation correctly.
173
PROTECTIVE FUNCTIONS
FR-PU04 PS
STOP
key of the PU has been
RESET
STOP
RESET
key of the
5