Table of Contents
Advertisement
setup screen
face detection
You can set to detect recognized face and trigger an event accordingly.
1. From the Setup menu, select the
<event (
2. Click <face detection>.
3. Set whether or not to < enable >.
4. Set the sensitivity level.
As the sensitivity grows, face detection
`
becomes more close and detailed.
5. Set the option to use the face detection
OSD.
If it is set to <on>, the number of faces
detected is displayed on the top of the
monitoring screen.
Ex) FD : XX (number)
6. Specify the activation time and activation condition.
For more information about <Activation time> and <Action>, refer to "Alarm input". (page 97)
`
7. When done, click [apply (
106_ setup screen
)> tab.
)].
Advertisement
Table of Contents
