Table of Contents
Advertisement
setup screen
3. Press the [
Your settings will be entered in the right list.
4. Press the [
Set data on the right list will be saved.
5. Press the [
It performs the tour operation.
6. Press the [
The running tour will be stop.
7. Press the [
Selected tour data will be deleted.
To set the tracing function
Tracking remembers the trace of movements instructed using the direction button and
reproduces it for your reference.
1. Set <mode> in <Sequence setup> to
<trace & auto run>.
The menu screen will switch to the
PTZ tracking and Auto operation menu
screen.
2. Select a tracking number.
The operation will be saved with display
of the memory usage. The saving time
differs, depending on the level of the
PTZ operation.
If memory is filled to 100% or the recording end configuration is not completed in
2 minutes from the beginning of saving, it will be automatically terminated.
3. Press the [
Selected tracing number will be saved.
4. Move the navigation path of saving using the pan/tilt/zoom.
5. Press the [
Saving is terminated.
6. Press the [
Selected tracing number will be activated as set.
74_ setup screen
] button.
] button.
] button.
] button.
] button.
] button.
] button.
] button.
Advertisement
Table of Contents
