Table of Contents
Advertisement
setup screen
• Profile : You can select the H.264 profiling method.
• Entropy coding : Reduce the possible compression loss due to encoding.
• Smart codec : Specify the use of Smart codec.
The Smart Codec will be active only if the codec is of H.264 and the compression system is
`
J
CBR.
• Multicast(SVNP) : Specify the use of the SVNP protocol.
- Multicast IPv4 address : Enter an IPv4 address with which you can connect to
the IPv4 network.
- Multicast Port : Specify the video communication port.
- Multicast TTL : Set the TTL for the SVNP packet.
• Multicast(RTP) : Specify the use of the RTP protocol.
- Multicast IPv4 address : Enter an IPv4 address with which you can connect to
the IPv4 network.
- Multicast Port : Specify the video communication port.
- Multicast TTL : You can set the TTL for the RTP packet.
what is Gov length?
GOV(Group of Video object planes) is a set of video frames for H.264 compression,
indicating a collection of frames from the initial I-Frame (key frame) to the next I-Frame.
GOV consists of 2 kinds of frames: I-Frame and P-Frame.
I-Frame is the basic frame for the compression, also known as Key Frame, which contains
one complete image data. P-Frame contains only the data that has changed from the
preceding I-Frame.
For H.264 codec, you can determine the GOV length.
66_ setup screen
Advertisement
Table of Contents
