Table of Contents
Advertisement
setup screen
• Defined area based rules
1. Set <iv analysis function> to
<enable>.
2. Set the type to <appearing/
Disappearing>.
3. Set the event rule to <Defined area
based rules>.
4. Drag and drop to a desired point of the
video.
The selected area by the drag-and-drop method will be set as specified.
5. To cancel your selection, simply click [clear (
6. When done, click [apply (
time schedule
You can set to save the video data at a certain interval as scheduled regardless of the
actual occurrence of the event.
1. From the Setup menu, select the
<event (
2. Click <time schedule>.
3. Set <timer event setup> to <enable>.
4. Specify the <activation time>.
• Always : The set operation is always
executed.
• Only scheduled time : The set
operation is executed periodically,
only at the specified time on the
specified day of the week.
5. Specify the <transfer interval>.
6. Specify the activation conditions.
• FTP sending : This sets the option to transfer by using FTP when an alarm is
input.
Refer to "FTP / E-mail" for more details. (page 94)
`
• Record : This sets the option to record the content in the SD memory card when
the alarm is input.
Set <Record> to <On> in <SD record>. (page 95)
`
7. When done, click [apply (
104_ setup screen
)> tab.
)].
)].
)].
Advertisement
Table of Contents
