Table of Contents
Advertisement
setup screen
Setup
You can configure the audio & video, network, event and system settings of the camera via the
network.
1. In the Live screen, click [Setup (
2. The Setup screen appears.
auDio & viDeo Setup
video profile
1. From the Setup menu, select the
<audio & video (
2. Click <video profile>.
3. Select a <video profile> number.
4. Click the input box of each item and
enter / select a desired value.
The context menu may differ depending on
`
the selected codec type.
• Default profile : If no profile is
selected when using the Web Viewer,
the default video profile is applied.
• E-mail/FTP profile : Video profile to
be transferred to the specified email
or FTP site.
Only the MJPEG codec can be set as the E-mail/FTP profile.
`
If you select the E-mail/FTP profile, the frame rate will be fixed to below 5.
`
• Record profile : This is the profile that is applied to video recording.
5. When done, click [apply (
In case of <Record profile> having larger resolution than 800x600 for MJPEG or target bitrates
`
M
bigger than 4800kbps for H.264, the <Normal> and <Event> settings for <SD record> is
changed to I-Frame automatically.
In such cases, applied setting remains even when the resolution or target bitrate is changed.
Profiles 1 and 2 are provided by factory default that cannot be deleted or renamed; besides, the
`
codec cannot be changed in any way.
64_ setup screen
)].
)> tab.
)].
Advertisement
Table of Contents
