Face Detection - Samsung SNP-L5233H User Manual

setup screen

face detection

You can set to detect recognized face and trigger an event accordingly.
1. From the Setup menu, select the
<event (
2. Click <face detection>.
3. Set whether or not to <enable> .
4. Select <Sensitivity> tab to set the
sensitivity level.
As the sensitivity grows, face detection
`
becomes more close and detailed.
5. Select the <area> tab and select 4
vertices in the image with your mouse
to specify the detection area.
Select up to 4 areas for detection or non-
`
detection.
While drawing the area, you can cancel an
`
area by right-clicking.
6. To delete an area, right-click on the
area, and select delete [oK] on the
pop-up menus.
7. Specify the activation time and
activation condition.
For more information about <Activation
`
time> and <Action>, refer to "Alarm input". (page 122)
8. When done, click [apply (
132_ setup screen
)> tab.
)].