setup screen
face detection
You can set to detect recognized face and trigger an event accordingly.
1. From the Setup menu, select the
<event (
2. Click <face detection>.
3. Set whether or not to <enable> .
4. Select <Sensitivity> tab to set the
sensitivity level.
As the sensitivity grows, face detection
`
becomes more close and detailed.
5. Select <area> tab and drag on the
screen to define the desired detection
area.
You can specify up to 4 detection areas.
`
While drawing the area, you can cancel an
`
area by right-clicking.
6. To delete an area, right-click on the
area, and select delete [oK] on the
pop-up menus.
7. Specify the activation time and
activation condition.
For more information about <Activation
`
time> and <Action>, refer to "Alarm input". (page 96)
8. When done, click [apply (
106_ setup screen
)> tab.
)].