Selecting The Colour Mode - Panasonic Workio DP-C262 Operating Instructions Manual

Selecting the Colour Mode

You can either copy in the machine selected colour mode, or you can change to the colour mode manually.
Full colour
The default colour mode can be changed. Refer to Copier Settings (For Key Opertor) in the Operating
Instructions (for Function Parameters) on the provided CD-ROM.
The colour mode settings will return to standard settings under the following conditions.
-If the power is turned OFF.
-If the Reset key is pressed.
1
Place original(s).
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if set in other
function mode.
3
Select "Quality Adj.".
8
Monochrome
4
Select the desired Colour Mode, and
then select "OK".
• Auto:
The colour original is copied in Full
Colour, and the monochrome
original is copied in Black & White
by automatically detecting the
original's colour.
• Black (Black & White) (see page 9)
• Full Colour (see page 9)
• 2 Colour (see page 10)
• 1 Colour (see page 12)
5
Enter the desired number of copies.
6
Press the Start key.
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.