Panasonic Workio DP-C262 Operating Instructions Manual page 54

5
Select "XY" to set the same value for X
and Y, or "X", "Y" to set a different
value for X and Y.
XY Select to set the same erasing width
for all sides.
X Select to set the erasing width for the
right and left sides.
Y Select to set the erasing width for the
top and bottom sides.
6
Input the erasing width with " " and
" ", or the keypad, and then select
"OK".
The erasing width can be set in 1 mm
increments from 5 mm to 99 mm.
7
Enter the desired number of copies.
8
Press the Start key.
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
54