Colour Balance - Panasonic Workio DP-C262 Operating Instructions Manual

Colour Balance

The original can be copied with adjusted the density level (Darker, Medium and Lighter) of Yellow,
Magenta, Cyan and Black.
1
Select "Colour Balance".
To display this screen, refer to step 1 of
Background (see page 24).
2
Select "Cyan", and then adjust Darker
Areas, Medium Areas and Lighter
Areas with "-" or "+".
Darker
Areas
Medium
Areas
Lighter
Areas
30
Each time "-" is selected, the level of darker
density decreases by 1 grade lower.
Each time "+" is selected, the level of darker
density increases by 1 grade higher.
Each time "-" is selected, the level of
medium density decreases by 1 grade lower.
Each time "+" is selected, the level of
medium density increases by 1 grade
higher.
Each time "-" is selected, the level of lighter
density decreases by 1 grade lower.
Each time "+" is selected, the level of lighter
density increases by 1 grade higher.
3
Adjust Darker Areas, Medium Areas
and Lighter Areas as well for Magenta,
Yellow and Black in the same way as
in step 2.
4
Select "OK".
Screen will return to step 1.
Select "OK", and then proceed to steps 6 to
8 of Quality Adjusting (see page 22).